- Rizwan Akhtar
- J. Jalwan
- S. Chakravarti
- B. K. Bandyopadhyay
- Tandra Bhaumik
- Abhijit Basu
- A. K. Boral
- R. L. Bhardwaj
- L. Babita Devi
- Durlav Prasad Bora
- S. K. Das
- R. K. Sharma
- R. A. Hazarika
- A. K. Pramanick
- M. K. Mitra
- G. C. Das
- B. Duari
- U. Agarwal
- M. Ghosh Chaudhuri
- S. Samanta
- R. Dey
- A. Ghosh
- G. Vinamra
- A. Kumar
- P. K. Rai
- S. Chattopadhyaya
- P. K. Sarkar
- Ashish Soni
- Anunay Priyesh
- Sidhanth Raj
- S. Bhatia
- Kajori Parial
- A. R. Ghosh
- D. Sengupta
- Indian Journal of Physiotherapy & Occupational Therapy-An International Journal
- Journal of Geological Society of India (Online archive from Vol 1 to Vol 78)
- Journal of Environment and Sociobiology
- Journal of Horticultural Sciences
- Veterinary World
- Indian Science Cruiser
- Indian Welding Journal
- Current Science
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z All
Mukherjee, S.
- To Compare the Immediate Effect of Deep Breathing Exercise and Incentive Spirometry on Abg after Mitral Valve Replacement Surgery
Authors
1 Jamia Hamdard, New Delhi,, IN
2 Department of Rehabilitation, Jamia Hamdard, New Delhi, IN
3 Interventional Cardiologist, Metro Heart Hospital, New Delhi, IN
Source
Indian Journal of Physiotherapy & Occupational Therapy-An International Journal, Vol 6, No 4 (2012), Pagination: 12-17Abstract
Purpose: To compare the Immediate effect of Deep Breathing Exercise and Incentive Spirometry on ABG after Mitral Valve Replacement surgery.
Methods : Thirty-two patients of elected MVR surgery with age group 20-40 years were included for the study. They were trained pre-operatively and assigned into two groups and performed either deep breathing exercise or incentive spirometry according to the group they assigned on second post-operative day.
Measurement: ABG variables; Pao2, Paco2 and Sao2 were measured on second post operative days before and after the interventions.
Results: Data analysis was performed using the software package SPSS 15.0.Independent paired test was performed to compare between the groups and paired test was used to compare all variables within group. Significant differences were found in Pao2 on second post operative days after breathing exercises. There was no significant value found in Incentive Spirometry group.
Conclusion: The result of the study suggested that deep breathing exercise could be of benefits in the treatment of post-operative oxygenation after mitral valve replacement surgery.
Keywords
Oxygenation, Breathing Exercises, Incentive Spirometry, Mitral Valve Replacement Surgery
References
- Pankaj Saxena, S. Luthra, R S Dhaliwal . Early charges in pulmonary functions after Mitral Valve Replacement. Ann. Thorac Med. 2007 July-Sep; 2(3): 111-117
- Elizabeth westerdahl, B Lindmark, T Erikson, G Hedenstiema and Arne Tenling. The immediate effects of Deep Breathing Exercise on Atelectasis and oxygenation after cardiac surgery. Scand. Cardiovasc. J. 2003; 37: 363-367
- Susan C Jenkins, S A Soutar, J M Loukota & Johnson. Physiotherapy after coronary artery surgery: are breathing exercises necessary? Thorax 1989; 44:634-639
- Tom J. Overned, Catherine M Anderson, S Deboorah Lucy and Birgitta I. Jonsson. The effect of Incentive Spirometry on post operative pulmonary complications. A systematic review. CHEST 2001; 120 : 971-978
- M Vitacca, E clini and N Ambrosino. Acute Effects of deep diaphragmatic breathing in COPD patients with chronic respiratory insufficiency. Eur. Resp. Jour.1998; 11: 408-415
- Hedstrand U, Liw M, and Ogren H –The Effect of Respiratory Physiotherapy on arterial oxygen tension. Acta Anaesthesiol Scand. 1978; 22(4): 349-52
- Stiller K, Montarello J, Wallace M, et al. Efficacy of breathing and coughing exercise in the prevention of pulmonary complication after Coronary Artery Surgery. Chest 1994; 105: 741-747
- Dull J L. Are maximal inspiratory breathing exercises or incentive spirometry better than early mobilization after CABG? Physical Therapy 13: 655-659; 1983
- Thomlow D K. Is chest physiotherapy necessary after cardiac surgery? Crit. Care Nurse 1995; 15: 39-46: quiz 47-48
- Susan C Jenkins, S.A. Soutar , J.M. Loukota, L.C. Johnson and John Moxham. A comparison of breathing exercises, incentive spirometry and mobilization after coronary artery surgery. Physiotherapy Theory and Practice:1990 ; Vol. 6, No. 3; 117-126
- Gosselink, Rik PhD; Schrever, Katleen M.SC; Cops, Philippe M.Sc; Paul MD. Incentive Spirometry does not enhance recovery after thoracic Surgery. Critical Care Medicine: March 2000-volume 28 (3); 679-683
- Marc Estenne, J C Yernault, J M Desmet, De Froyer. Phrenic and Diaphragm function after coronary artery bypass grafting.Thorax.1985; 40:293-299
- Elizabeth Westerdahel, B Lindmark. Chest Physiotherapy after coronary artery bypass grafting – A comparison of three different deep breathing Techniques. J Rehab. Med. 2001; 33:79-84
- Elizabeth Westerdahl, B lindmark, T Erikson, O Friberg, A Tenling. Deep Breathing Exercise reduces Atelectasis and improves pulmonary function after coronary bypass surgery. Chest. 2005; 128: 3482-88
- Geology and Mineralogy of the Chromite Deposits Occurring near Kondapalle, Kistna District, A.P.
Authors
1 Department of Geology, University of Calcutta, Calcutta, IN
Source
Journal of Geological Society of India (Online archive from Vol 1 to Vol 78), Vol 12, No 4 (1971), Pagination: 383-387Abstract
No Abstract.Full Text
- The Gonditic Rocks of Manbazar, Purulia District West Bengal
Authors
1 Department of Geology, Calcutta University, Calcutta, IN
Source
Journal of Geological Society of India (Online archive from Vol 1 to Vol 78), Vol 16, No 4 (1975), Pagination: 485-490Abstract
The presence of a Gonditic rock unit is reported from Manbazar, Purulia district, West Bengal. It occurs as a distinct band cofolded with the associated metapelites into an isoclinal antiform followed to the west by a complimentary synform with granitic rocks occupying the antiformal core. The metasediments including the gonditic unit were metamorphosed under Upper Greenschist Facies conditions of regional metamorphism. Mineralogically it is composed mainly of quartz, spessartite, piedmontite, braunite, magnetite, specularite and ilmenite. The minerology and textural relationships indicate moderately high temperature and high oxygen fugacity under which the original sediments were metamorphosed.- Petrology of the Nepheline Syenites from Santuri Purulia District, West Bengal
Authors
1 Department of Geology, Calcutta University, Calcutta 700 019, IN
2 Department of Geology, Indiana University, Bloomington, IN 47405, US
Source
Journal of Geological Society of India (Online archive from Vol 1 to Vol 78), Vol 36, No 6 (1990), Pagination: 589-606Abstract
A nepheline syenite pluton is reported from the area around Santuri, Purulia District. Microcline, phenocrystic mesoperthite, sodic oligoclase and nepheline are the predominant minerals. Biotite, barkevikite, apatite and calcite are the common accessory minerals. Nine rock samples have been chemically analysed. The nepheline syenites are miaskitic. Available data suggest a magmatic origin. The alkaline melt was emplaced latetectonically along fissures developed during the last stage of deformation. The alkaline rocks of the present area exhibit a striking resemblance to many of the nepheline syenites occurring along the Eastern Ghats.Keywords
Petrology, Nepheline Syenites, Alkaline Rocks, Santuri Purulia Dt. West Bengal.- Estimation of Protein and Lipid of Ceylonocotyle scoliocoelium (Trematoda) Following Administraion of Mebendazole under in vitro Condition
Authors
1 Department of Zoology, Jogamaya Devi College, Kolkata 700 026, IN
2 Department of Zoology, Dinabandhu Andrews College, Koikata-700 084, IN
Source
Journal of Environment and Sociobiology, Vol 3, No 2 (2006), Pagination: 105-110Abstract
Mebendazole is reported as a highly elTective antihciininthic drug. This compound causes mortality of the helminth parasites. In viiro administration of mebendazole lowered the total protein content of Ceyloiwcoiyle scoliocoeliiiiii, which is a common rumen irematode of cattle. Death of the parasite after mebendazole treatment is supposed to be due to enzymatic blockage of protein synthesis or due to activation of certain proteolytic substances. No change of local lipid content is observed after mebendazole administration. Total protein and lipid of C. scoliocoeliiim were estimated in spectrophotometry. Protein bands were studied by SDS-PAGE.Keywords
Mebendazole, Irenuilode, Protein Content, Lipid Content.- Studies on Physico-Chemical, Sensory and Microbiological Quality of Kinnow Juice Blends under Refrigerated Storage
Authors
1 Department of Horticulture (PHT), S.K.N. College of Agriculture, Jobner - 303328, IN
Source
Journal of Horticultural Sciences, Vol 7, No 2 (2012), Pagination: 166-173Abstract
Various fruit juice blends were prepared as (i) Kinnow juice:Aonla juice:Ginger juice in 100:0:0; 95:5:0; 92:5:3 ratios and Kinnow juice:Pomegranate juice:Ginger juice in 90:10:0; 87:10:3 ratios for improving flavour, palatability, nutritive value and medicinal value. The juice blends were preserved by pasteurization at 75°C or 85°C for 15 minutes, and, by adding potassium meta-bisulphite (KMS) at 500 or 750 ppm. These blends were stored in 200ml colourless glass bottles under refrigerated conditions (4±1°C) for six months and tested at three month intervals for physicochemical sensory quality and microbial population. Individual effect of juice blending ratio, processing temperature and KMS treatment was found to be significant for prolonging storage life and for maintaining an acceptable quality of the juice blends. The blend of Kinnow:Pomegranate:Ginger juice at 87:10:3 ratio, followed by Kinnow:Aonla:Ginger juice @ 92:5:3, processed at 75°C for 15 min with 750 ppm KMS, was the most effective for obtaining superior physico-chemical and sensory quality of the blend. However, minimum microbial population was recorded in the juice processed at 85°C (and not 75°C) with the same treatment combination.Keywords
Kinnow Juice, Juice Blends, Microbial Quality, Physico-Chemical Properties, Ready-To-Serve.Full Text
- Virulence Gene Profiling of Porcine Pasteurella multocida Isolates of Assam
Authors
1 KVK Churachandpur, ICAR Manipur Centre, Imphal, Manipur, IN
2 Department of Microbiology, College of Veterinary Science, AAU, Khanapara, Guwahati - 781 022, Assam, IN
3 Department of Veterinary Epidemiology and Preventive Medicine, CVSc, CAU, Aizawl, Mizoram, IN
4 Department of Veterinary Public Health, College of Veterinary Science, AAU, Khanapara, Guwahati - 781 022, Assam, IN
Source
Veterinary World, Vol 11, No 3 (2018), Pagination: 348-354Abstract
Aim: The present study was conducted to detect and identify the virulence genes in Pasteurella multocida isolates of porcine origin from Assam.
Materials and Methods: A total of 21 porcine P. multocida isolates were subjected to capsular typing and detection of virulence-associated genes (pfhA, tbpA, hgbB, toxA, oma87, ompH, and nanB) using various polymerase chain reaction (PCR) methods reported elsewhere. Further, pathogenicity of the porcine isolates of P. multocida was studied in mice. For each strain of P. multocida selected for pathogenicity trial, the group of mice was injected intraperitoneally (i/p) with 0.1 ml of the inoculum prepared from respective field isolates, containing 109 organisms per ml.
Results: Capsular typing of the isolates by multiplex PCR showed two capsular types, type A (66.66%) and type D (33.33%). All the isolates were positive for outer membrane protein genes, oma87 and ompH genes. Iron acquisition genes, tbpA and hgbB, were detected in 14.28% and 19.04% of the isolates. The dermonecrotoxin encoding gene, toxA, was present in 23.80% of the isolates. Filamentous hemagglutinin encoding gene, pfhA, was detected in 28.57%. The virulence gene distribution pattern of the isolates indicates the important role of the genes in disease pathogenesis.
Conclusion: From the present study, it can be concluded that toxA gene is an important marker gene for defining the pathogenic potential of P. multocida strains in swine.
Keywords
Capsular Type, Pasteurella multocida, Porcine, Virulence-Associated Genes.Full Text
- Synthesis and Optimization of Silica -Ni Nanocomposite
Authors
1 Department of Metallurgical & Material Engineering, Jadavpur University, Kolkata-700032, IN
2 School of Material Science & Nano -Technology, Jadavpur University, Kolkata-700032, IN
3 Rustech Products Pvt Ltd, Kolkata -700045, IN
Source
Indian Science Cruiser, Vol 26, No 5 (2012), Pagination: 13-17Abstract
The optimum combination of experimental variables- temperature, time of heat treatment under nitrogen atmosphere and amount of Ni-salt has been delineated to find the maximum yield of nanophase Ni in the silica powder. The size of Ni in the silica powder is found to be 32nm and 45nm. A statistically adequate regression equation, within 95% confidence limit has been developed by carrying out a set of active experiments within the framework of design of experiment. The regression equation clearly indicates the beneficial role of the temperature and time of heat treatment.
Keywords
Silica Powder; Ni, Design of Experiments; Nanocomposites.- Quantification of Valuable Metals from E-Waste
Authors
1 Department of Metallurgical & Material Engineering, J U, IN
2 School of Materials Science & Nanotechnology, J U, IN
Source
Indian Science Cruiser, Vol 27, No 1 (2013), Pagination: 51-54Abstract
E-waste is a growing environmental concern for both developed and developing countries in recent times. Huge quantity of e-waste is generated world-wide each year. In the present work, authors have processed three different kinds of e-waste sources (SMPS, mobile phone & television remote), and while presenting a reproducible technique using chloride leaching to extract the valuable content (e.g. gold, silver) and other elements (e.g. Co, Ni), also presented the comparative study of their observed composition.
Keywords
E-Waste, Chloride Leaching, Atomic Absorption Spectroscopy.- Identification and Assessment of the HAZ Softening and Hardening Phenomena for Submerged Arc Welding Process for Structural Steel Plates
Authors
1 Department of Mechanical Engg. Govt Engineering College, Kalyani, W.B,, IN
2 MECON India Ltd., Ranchi, IN
3 Department of Mechanical Engg. & Mining Machinery Engg., Indian School of Mines, University, Dhanbad, IN
Source
Indian Welding Journal, Vol 42, No 2 (2009), Pagination: 37-42Abstract
Submerged Arc Welding (SAW) process has lot of social and economical implication. Critical set of variables are involved in this process, and they are needed to be controlled. An attempt has been made in this paper to find out- the influence of the heat input on HAZ hardness (change of hardness & microstructure) for Submerged Arc Welding Process of Mild steel plates. Mild steel plates are welded by changing input variables (current, voltage, trolley speed, i.e. heat input) and Rockwell hardness No. on different grid points (points are taken horizontally & vertically 2 mm apart) of welded surface and at the zone adjacent to the welded portion has been observed. A detailed analysis of the microstructure changes is carried out to understand the HAZ softening phenomenon.
Keywords
SAW, HAZ Hardness, Rockwell Hardness No., Microstructure, Grain Growth.- Indepth Investigations into the Capability of Plazma Arc Cutting of Mild Steel Tubes
Authors
1 Department of Mechanical Engineering & Mining Machinery Engineering, Indian School of Mines University, Dhanbad, IN
2 Mecon Ltd., Ranchi, IN
Source
Indian Welding Journal, Vol 42, No 3 (2009), Pagination: 58-64Abstract
Plasma Arc cutting (PAC) is a process of cutting steel and other metals (or sometimes other materials) using a plasma torch. In this method, an inert gas (in some units, compressed air) is blown at high speed out of a nozzle. At the same time an electrical arc is formed through that gas from the nozzle to the surface being cut, turning some of that gas to plasma. The plasma is sufficiently hot to melt the metal being cut and moves sufficiently fast to blow molten metal away from the cut. Plasma can also be used for plasma arc welding and other applications. In Plasma Arc Cutting (PAC), the plasma gas flow is enhanced so that the intense and deeply penetrating plasma jet cuts through the material and molten material is removed as cutting dross. PAC differs from oxy-fuel cutting in that the plasma process operates by using the arc to melt the metal whereas in the oxy-fuel process, the oxygen oxidizes the metal and the heat from the exothermic reaction melts the metal. Unlike oxy-fuel cutting, the PAC process can be applied to cutting metals which form refractory oxides such as stainless steel, cast iron, aluminum, and other non-ferrous alloys. In this paper the deviations in the thickness of the cut profile of the square tubes are critically analyzed for assessment of the deviations in the cut surface of the square tubes of structural steel due to the phenomena like top edge rounding, dross, cut surface bevel angle, top spatter and extended kerf width etc.
Keywords
Top Edge Rounding, Kerf Width, Dross, Top Spatter, Cut Surface Bevel Angle.- Weldbead Parametric Estimation of SAW Process Through Neural Network
Authors
1 Dept., Kalyani Govt Engg. College, Kaiyani, IN
2 Mecon Limited, Ranchi, IN
3 Department of Mechanical Engg. & Mining Machinery Engg. Indian School of Mines University, Dhanbad, IN
Source
Indian Welding Journal, Vol 40, No 4 (2007), Pagination: 33-43Abstract
In this paper, an attempt has been taken to develop a model to predict the yield characteristics (weld bead parameters) of Submerged Arc Welding (SAW) process with the help of neural network technique. The SAW process has been chosen for this application because of the complex set of variables and high set up cost involved in the process as well as its significant application in the manufacturing of critical equipments which have a lot of economic and social implications.
Under this study the neural network model has been trained according to the actual inputs and outputs.
After completing training, the desired inputs have been given to the model and it gives the estimated output value. And according to this we can also estimate the error between the actual and predicted results. Neural network is implemented here because of having remarkable ability to derive meaning from complicated or imprecise data and can be used to extract patterns and detect trends that are too complex to be noticed by either humans or other computer techniques. Hence a trained neural network can be thought of as an "expert" in the category of information it has been given to analyses.
- A GIS-Based Approach for Radiation Risk Assessment Around a Thermal Power Plant Towards Adopting Remedial Measures
Authors
1 Department of Geology and Geophysics, Indian Institute of Technology-Kharagpur, Kharagpur 721 302, IN
2 Department of Science and Technology and Biotechnology, Government of West Bengal, Kolkata 700 091, IN
Source
Current Science, Vol 116, No 10 (2019), Pagination: 1683-1689Abstract
Coal combustion in thermal power plants releases ash, which is reported to cause adverse health hazards in humans and other organisms. Owing to the presence of radionuclides, it is also considered as a potential radiation hazard. In this study, based on the surface radiation measurements and relevant ancillary data, expected radiation risk zones were identified with regard to human population residing near a thermal power plant using GIS. With population density as the vulnerability determining criterion, about 20% of the study area was in the ‘high’ risk zone and another 20% in the ‘low’ risk zone. The remaining 60% was under ‘medium’ risk zone. Based on the findings of this study, greenbelt locations have been proposed as a remedial measure.Keywords
Geographic Information System, Radiation Risk Analysis, Remedial Measures, Surface Radiation, Thermal Power Plant.Full Text
References
- Amin, Y. M., Khandaker, M. U., Shyen, A. K. S., Mahat, R. H., Nor, R. M. and Bradley, D. A. Radionuclide emissions from a coal-fired power plant. Appl. Radiat. Isot., 2013, 80, 109–116, doi:10.1016/j.apradiso.2013.06.014.
- Nalbandian, H., Trace Element Emissions from Coal, 2012; IEA Clean Coal Centre, CCC/203, ISBN 9789290295235.
- Sahu, S. K., Tiwari, M., Bhangare, R. C., Ajmal, P. Y. and Pandit, G. G., Partitioning behavior of natural radionuclides during combustion of coal in thermal power plants. Environ. Forensics, 2017, 18, 36–43; doi:10.1080/15275922.2016.1230910.
- Flues, M., Camargo, I. M. C., Silva, P. S. C. and Mazzilli, B. P., Radioactivity of coal and ashes from Figueira coal power plant in Brazil. J. Radioanal. Nucl. Chem., 2006, 270, 597–602.
- Karangelos, D. J., Petropoulos, N. P., Anagnostakis, M. J., Hinis, E. P. and Simopoulos, S. E., Radiological characteristics and investigation of the radioactive equilibrium in the ashes produced in lignite-fired power plants. J. Environ. Radioact., 2004, 77, 233– 246; doi:10.1016/j.jenvrad.2004.03.009.
- Bhangare, R. C., Ajmal, P. Y., Sahu, S. K., Pandit, G. G. and Puranik, V. D., Distribution of trace elements in coal and combustion residues from five thermal power plants in India. Int. J. Coal Geol., 2011, 86, 349–356; doi:10.1016/j.coal.2011.03.008.
- Flues, M., Sato, I. M., Scapin, M. A., Cotrim, M. E. B. and Camargo, I. M. C., Toxic elements mobility in coal and ashes of Figueira coal power plant, Brazil. Fuel, 2013, 103, 430–436; doi:10.1016/j.fuel.2012.09.045.
- Xu, M., Yan, R., Zheng, C., Qiao, Y., Han, J. and Sheng, C., Status of trace element emission in a coal combustion process: a review. Fuel Process. Technol., 2003, 85, 215–237; doi:10.1016/S0378-3820(03)00174-7.
- Lu, X., Zhao, C., Chen, C. and Liu, W., Radioactivity level of soil around Baqiao coal-fired power plant in China. Radiat. Phys. Chem., 2012, 81, 1827–1832, doi:10.1016/j.radphyschem.2012.07.013.
- Corbacho, J. A. and Baeza, A., Measurement of natural radionuclides and external radiation exposure due to fly ash from a coalfired power plant (Spain) deposited on soils – comparison using two different measurement techniques. Radiat. Prot. Dosim., 2018, 1–8, doi:10.1093/rpd/ncy083.
- Lu, X., Li, L. Y., Wang, F., Wang, L. and Zhang, X., Radiological hazards of coal and ash samples collected from Xi’an coal-fired power plants of China. Environ. Earth Sci., 2012, 66, 1925–1932; doi:10.1007/s12665-011-1417-x.
- Liu, G., Luo, Q., Ding, M. and Feng, J., Natural radionuclides in soil near a coal-fired power plant in the high background radiation area, South China. Environ. Monit. Assess., 2015, 187, 356, doi:10.1007/s10661-015-4501-y.
- Charro, E. and Peña, V., Environmental impact of natural radionuclides from a coal-fired power plant in Spain. Radiat. Prot. Dosim., 2013, 153, 485–495; doi:10.1093/rpd/ncs126.
- https://www.epa.gov/radiation/radiation-health-effects
- Tadmor, J., Radioactivity from coal-fired power plants : a review. J. Environ. Radioact., 1986, 4, 177–204.
- Varnes, D. J., Landslide hazard zonation: a review of principles and practice. Natural Hazards, UNESCO, Paris, 1984, 3; ISBN 923-101895-7.
- Adhya, S., Management of fly ash of Kolaghat thermal power station, Purba Medinipur, West Bengal. Electron. Int. Interdiscip. Res. J., 2014, III, 32–43.
- Pramanik, P., Chowdhury, R., Biswas, S. and Syamal, A. K., Assault of coal-fired thermal power plant on pulmonary health of school boys aged 7 to 15 years. IOSR J. Dent. Med. Sci., 2015, 14, 133–139; doi:10.9790/0853-1463133139.
- Mondal, M., Land people – a dynamic interaction of Purba Medinipur district, West Bengal. IOSR J. Pharm. 2012, 2, 56–61.
- http://www.wbpdcl.co.in/component/content/article/14-sample-data-articles/90-generatingunits-kolaghat-overview.html.
- Census, Villagewise Population data, Government of India, 2011; http://censusindia.gov.in
- UNSCEAR, Sources and effects of ionizing radiation. United Nations Scientific Committee on Environmental and Atomic Radiation, New York, 2000.
- Casella, G., Illustrating empirical Bayes method. Chemometr. Intell. Lab. Syst. 1992, 16, 107–125.
- Krivoruchko, K., Empirical Bayesian Kriging, Environmental Systems Research Institute (ESRI) Press, Redlands, CA, USA, 2012, pp. 6–10.
- Glade, T., Birkmann, J. and Fuchs, S., Vulnerability assessment in natural hazard and risk analysis : current approaches and future challenges. Nat. Hazards, 2012, 64, 1969–1975; doi:10.1007/ s11069-012-0352-9.
- Chatzimouratidis, A. I. and Pilavachi, P. A., Objective and subjective evaluation of power plants and their non-radioactive emissions using the analytic hierarchy process. Energ. Policy, 2007, 35, 4027–4038; doi:10.1016/j.enpol.2007.02.003.
- Saaty, T. L., Decision making – the analytic hierarchy and network processes (AHP/ANP). J. Syst. Sci. Syst. Eng., 2004, 13, 1–35.
- Bello-Dambatta, A., Farmani, R., Javadi, A. A. and Evans, B. M., The analytical hierarchy process for contaminated land management. Adv. Eng. Inform., 2009, 23, 433–441; doi:10.1016/j.aei.2009.06.006.
- Bhushan, N. and Rai, K., The analytic hierarchy process. In Strategic Decision Making: Applying the Analytical Hierarchy Process, Springer-Verlag London, 2004; pp. 11–21; ISBN 1-85233-756-7.
- Saaty, R. W., The analytic hierarchy process – what and how it is used. Math. Model., 1987, 9, 161–176.
- Saaty, T. L., A scaling method for priorities in hierarchical structures. J. Math. Psychol., 1977, 15, 234–281.
- Saaty, T. L., Decision making with the analytic hierarchy process. Int. J. Serv. Sci., 2008, 1, 83–98.
- Jenks, G., The data model concept in statistical mapping. Int. Yearb. Cartogr., 1967, 7, 186–190.